The FV-700 series Daimler Ferret Scout Car

 

 

 

 

Other variants

 

Training Aid with the MK 2/3 - MK 2/6 hybrid in the background

 

 

Mk 1 Ferret

 

 

MK 1/2 Ferret

 

 

MK 2/2 Ferret

 

   

 

MK 2/3 Ferret (MK 2/5)

 

   

 

MK 2/4

Up armoured (flat rear hatches extra plates welded to the hull and Turret sides. Also on some up armoured Ferrets you will find strengthening plates behind the four external bins on the hull seams.

 

   

 

Mk 2/6 Ferret armed with wire guided Vigilant missiles

The centre picture is a Mk2/3 fitted with a MK2/6 Vigilant Turret (no reload bins) shouldn't have a spare wheel

       

 

Mk 4 onwards the so called 'big wheel' Ferret

 

           

           

           

 

MK 5 Ferret with Swingfire missiles

 

   

Lex Moodie has kindly allowed me to use three photos (Training Aid, MK 2/6 & MK5 Ferret)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I'm attempting to list all of the bins that should be installed internally and externally on each mark of Ferret and any CES which is common to one particular mark off Ferret as well.

I would welcome any pictures for this section

 Contact Andy

This part of the page is still under construction

 Internal bins / boxes  Number off per vehicle  Position in vehicle  Ferret MK  Picture off item
 No.80 smoke grenade boxes Two   1,2,4 & 5
 No.36 Mills Grenade boxes Up to Three carried MK 1's & MK 1/2's have three boxes, turreted versions only have two boxes

See note on the left

 
 Splinter Screen box/holder One   1,2,4 & 5
 Driver’s No.17 periscope box One   1,2,4 & 5
 Commanders periscope box One   2,4 & 5
 Flask holders Two   1,2,4 & 5
 30. Cal ammo box holder One  Mounted near to the escape hatch 1,2,4 & 5
 Bren magazine box One  Mounted near to the escape hatch 1
 30. Cal ammo holder bin One  Mounted on the escape hatch 1,2,4 & 5  
 30. Cal ammo holder bin One  Mounted on the escape hatch (slot for AFV Spares box) 1,2,4 & 5
 Fold down seats (jump seat) Two  Mounted on the escape hatches  
 AFV Gun spares box One    
 First aid box holder (internal) One   1,2,4 & 5
 First aid box holder (external) One   1,2,4 & 5
 Bulb box holder One Mounted near the drivers left foot on either the bevel box or the hull side (02CA35 has the hull mounting) 1,2,4 & 5
 Bulb box One   1,2,4 & 5  
 Sterling magazine holder One   1,2,4 & 5
 Sten / Sterling magazine holder? One   1,2,4? & 5?
 Canvas cover

 Support bar

One  CES / kit common only to the MK1 Ferret 1
One  CES / kit common only to the MK1 Ferret 1
 Document holder One  Mounted internally but later moved to the large centre bin 1,2,4 & 5
 WS 88 Bin One  Mounted and set back too the drivers left

1,2,4 & 5

 Spotlight One  

2,4 & 5

 
 Spotlight cover One  

2,4 & 5

 
 Sten / Sterling mount One   1,2,4 & 5  
 Sterling mount with seat belt mounting One   1,2,4 & 5
 Bren barrel mount One   1 & 1/2  
 Bren butt mount One   1 & 1/2  
 Tray turret (Browning) One   2,4 & 5
 Tray turret (GPMG) One   2,4 & 5  
 Oil spares box (turret tray) One   2,4 & 5  
         
 Sand Channels Two   1,2,4 & 5
 Pierced steel planking (PSP) Two   1,2,4 & 5
         
 Missile re-load bin MK 2/6 only (external) One  

MK 2/6 only

 
 Left Front bin (external) One   Mk's 1 & 2  
 Spare wheel mounting (doubles as the escape hatch) One   Mk's 1 & 2  
 Left rear bin (external) One   Mk's 1 & 2  
 Right front bin (external) One   Mk's 1 & 2  
 Centre bin (external) One   Mk's 1 & 2  
 Right rear bin (external) One   Mk's 1 & 2  

 

 

Last updated on the 18/01/2008 22:45 Copyright © 2007, 2008